HP Deskjet 9670 Printer - Printing borderless

background image

Printing borderless

Borderless printing lets you print to the edges of certain paper types and a range of standard
paper sizes from A6 (105 by 148 mm) to A3 (297 by 420 mm). The printer can also print on
4-by-6 inch photo paper.

If you are printing photos, you can enhance them by printing in six-ink color printing mode. See

“Printing with six-ink color”

.

For Windows

1

Load the appropriate paper:

• If you are printing one or just a few sheets, you can use the front or rear manual feed

slot. If so, continue with the steps below and load the paper in a later step.

• If you are using the input tray, see

“Loading media in the input tray”

.

2

Open the file you wish to print.

3

Open the printer driver (see

“Printing a document”

).

4

Click the

Paper/Quality

tab.

5

Select the paper size from the

Size is

drop-down list.

6

Select the

Borderless Printing

check box.

7

Select the paper source from the

Source is

drop-down list. If you are printing on thick or

photo paper, select the manual feed option.

8

Select the paper type from the

Type is

drop-down list. Do not select

Automatic

.

9

Select the

Borderless Auto Fit

check box to automatically resize the image to print

without a border.

10

If you are printing photos, select

Best

from the

Print Quality

drop-down list. Alternatively,

select

Maximum dpi

, which provides up to 4800

x

1200 optimized dpi* for optimum print

quality.

*Up to 4800 x 1200 optimized dpi for color printing and 1200 input dpi. This setting will
temporarily use a large amount of hard disk space (400 MB or more) and will print slower.
Photo cartridge, if present, further enhances the print quality.

11

Change any other desired print settings and click

OK

.

12

Print your document.

13

If you are using the front or rear manual feed slot, see

“Printing with the front or rear

manual feed slot”

.

14

If you printed on photo paper with a tear-off tab, remove the tab to make the document
completely borderless.

Open the file in a software application and assign the image size. Make sure the size
corresponds to the paper size on which you are printing the image.

background image

ENWW

4-25

For Macintosh

1

Load the appropriate paper:

• If you are printing one or just a few sheets, you can use the front or rear manual feed

slot. If so, continue with the steps below and load the paper in a later step.

• If you are using the input tray, see

“Loading media in the input tray”

.

2

Open the file you wish to print.

3

Click

File

, and then click

Page Setup

.

4

Select the borderless paper size.

5

Click

File

, and then click

Print

.

6

Open the

Paper Type/Quality

panel.

7

Mac OS 9.1.x and 9.2.x: Select the media group and type.
Mac OS X (10.1 and later): Click the

Paper

tab and select the media type and source.

8

If you are printing photos, select

Best

print quality. Alternatively, select

Maximum dpi

,

which provides up to 4800

x

1200 optimized dpi* for optimum print quality.

*Up to 4800 x 1200 optimized dpi for color printing and 1200 input dpi. This setting will
temporarily use a large amount of hard disk space (400 MB or more) and will print slower.
Photo cartridge, if present, further enhances the print quality.

9

Change any other desired print settings and click

OK

or

Print

.

10

If you are printing on thick or photo paper, insert paper into the rear manual feed slot at the
back of the printer. (For instructions on feeding paper manually, see

“Printing with the front

or rear manual feed slot”

.)

11

If you printed on photo paper with a tear-off tab, remove the tab to make the document
completely borderless.

background image

4-26

ENWW