HP Deskjet 9670 Printer - Printout is faded or colors are dull

background image

Printout is faded or colors are dull

Check the print quality setting

The

Fast

options use less ink and print at a faster rate, which is good for printing drafts. To

achieve a better colored printout, select

Normal

,

Best

, or

Maximum dpi

print quality in

the printer driver.

Check the paper type setting

When printing on transparencies or other special paper types, select the corresponding
paper type in the printer driver.

Check the paper type

Some paper types are not suitable for use with your printer. See

“Selecting print media”

for

tips on using print media.

Check the print cartridges for low ink or clogs

If the print cartridge lights are on or blinking, see

“Printer lights reference”

.

A print cartridge may be low or out of ink. Check the print cartridge ink levels.

Windows:

See

“Using the Toolbox”

.

Macintosh:

See

“Displaying the HP Inkjet Toolbox”

.

Replace any low or empty print cartridges (see

“Installing or replacing the print

cartridges”

) and then print again.

Whenever print quality deteriorates, it is a good idea to clean the print cartridges. See

“Cleaning the print cartridges”

.

Check that all the lines on the test page are connected and printed properly. If the
lines are broken, your print cartridge is probably out of ink. Replace your print
cartridge with a new one. See

“Installing or replacing the print cartridges”

and

“HP

supplies and accessories”

.

If you are printing with a single print cartridge, see

“Printing with a single print

cartridge”

.

Make sure you are printing on the correct side of the media

Load media print-side down in the input tray and front manual feed slot.

Load media print-side up in the rear manual feed slot.